Genius KILO TX2 JLC Remote control View larger

Genius KILO TX2 JLC Remote control

6100332

New product

Brand : Genius

Frequency : 868.35 MHz

Number of buttons : 2

Battery : CR2032 x2

Coding : Rolling code

More details

In stock !

17,90 € VAT incl.

More info

Take advantage of discounts on this product :

- 3% reduction with the purchase of 2 remote controls
- 5% discount with the purchase of 3 or more remote controls
- 7% discount with the purchase of 5 or more remote controls
- 10% discount with the purchase of 10 or more remote controls


Rolling code remote control, 868.35 MHz, 2 channels.
Warning : The remote control can be programmed without problem unless you are living in a condominium, in which case the receiver may be locked. Check before purchasing this remote.


Guide to programming your remote from an already programmed remote:

Step 1. While near your receiver, simultaneously press the two buttons on your already programmed remote control. (If your already programmed remote control has 4 keys, you must simultaneously press the keys located at the top right and bottom left). The LED on the remote control flashes.
Step 2. Within 8 seconds, press and hold the button to be transmitted on the already programmed remote control. The LED on the remote control lights up steadily. Bring the new remote control in front of the old remote control, and press the button you want to program on the new remote control. The LED of the new remote control should blink twice and then go out. Finally release the press on the button to be transmitted on the already programmed remote control.
Step 3. Double press the button you want to program on your new remote. Repeat the procedure for each button you want to program, then wait 10 seconds. This is now scheduled!


Guide to programming your remote from your receiver:

Step 1. While near your receiver, simultaneously press both buttons on your remote control. The LED on your remote control flashes.
Step 2. Within 8 seconds, press and hold the programming button on your receiver. The LED of your receiver flashes. Press the button you want to program on your new remote. The LED on your remote control lights up for two seconds. Then release the press on the programming button.
Step 3. Double press the button you want to program on your new remote. Repeat the procedure for each button you want to program, then wait 10 seconds. This is now scheduled!

A note about the guide? Do not hesitate to contact us via the contact form!