Brand : Hörmann
Dimensions : 32 x 66 x 13 mm
Frequency : 868.30 MHz
Number of buttons : 2
Battery : CR2025
This product is no longer in stock
Warning: Last items in stock!
Take advantage of discounts on this product :
- 3% reduction with the purchase of 2 remote controls
- 5% discount with the purchase of 3 or more remote controls
- 7% discount with the purchase of 5 or more remote controls
- 10% discount with the purchase of 10 or more remote controls
2-button black remote control with high-end metal housing, usable as a key ring.
The remote control is supplied with complete instructions for programming.
Guide to programming your remote from an already programmed remote:
Step 1. While being near your motorization, place your already programmed remote control and your new remote control side by side. Press and hold the key to transmit on your already programmed remote control. The LED lights up blue for 2 seconds, then turns off. After 5 seconds, the LED flashes red and blue alternately. Release the pressure.
Step 2. Keep pressing the button you want to program on your new remote. The LED lights up blue for 2 seconds, turns off, then slowly flashes blue. When the radio code is recognized, the LED flashes blue rapidly, then goes out after 2 seconds. Release the pressure.
Step 3. Repeat the procedure for each button you want to program, then wait 10 seconds. Your new remote control is now programmed!
Note: You have 15 seconds to transmit the radio code from the old remote control to the new one. If the radio code is not transmitted within this interval, the procedure must be repeated.
A note about the guide? Do not hesitate to contact us via the contact form!