Hörmann HSD 2 BS remote control

Black 2-button remote control with high-quality metal housing, usable as a key ring.
This transmitter is not a universal remote control. It is compatible with all Hörmann Bisecur remote controls. Please check the model of your functional remote control to operate your swing gate / sliding gate / door automation before ordering.
The remote control is supplied with full instructions for programming and the battery is included.

Guide to programming your remote control from an already programmed remote control:

Step 1. Place your previously programmed transmitter and your new beeper side by side. Press and hold the button to be transmitted on your previously programmed remote. The LED lights up blue for 2 seconds and then goes out. After 5 seconds, the LED flashes alternately in red and blue. Release the button.
Step 2. Press and hold the button you wish to program on your new remote control. The LED lights up blue for 2 seconds, goes out and then flashes slowly in blue. When the radio code is recognised, the LED flashes quickly in blue, then goes out after 2 seconds. Release the button.
Step 3. Repeat the procedure for each button you wish to program, then wait 10 seconds. Your new remote control is now programmed!

Any comments about the guide? Don't hesitate to contact us via the contact form!

Frequently asked questions :

I live in a condominium. Can I buy a Hörmann HSD 2 BS remote control and program it myself?

It is very likely that your building manager has blocked the condominium's receiver. Please contact them before ordering.