Nice ON2EFM Remote control

Take advantage of discounts on this product:

- 7% discount for 2 or more remote controls

Rolling code gate/garage door remote control, 868.46 MHz, 2 buttons.
This transmitter is not a universal remote control. It is only compatible with OXIFM and OX2FM receivers. Furthermore, it can only be programmed from an ONEFM remote control.
Therefore, it is not compatible with the ONE remote control, which has the same appearance but is black in colour.
Please check the compatibility of this transmitter with your swing gate / sliding gate / door automation system before ordering.
The ON2EFM beeper is supplied with instructions and the battery is included.

Guide to programming your remote control from an already programmed remote control:

Step 1. With your receiver close by, place the two transmitters face to face.
Step 2. Press the button you wish to program on your new remote until the LED on the old remote lights up. The LED on the old remote control will start to flash when you release the button.
Step 3. Press the button to be transmitted on the previously programmed remote control until the LED on the new remote control lights up. The LED on the new remote control goes out when you release the button.
Step 4. Repeat the procedure for each button you wish to program, then wait 10 seconds. Your new remote control is now programmed!

Any comments about the guide? Don't hesitate to contact us via the contact form!

Frequently asked questions :

I live in a condominium. Can I buy a Nice ON2 EFM remote control and program it myself?

It is very likely that your property manager has blocked the condominium's receiver. Contact him before ordering.

Is this remote control compatible with the ONE remote controls?

No, these two transmitters are not compatible.