New product
Brand : FAAC
Frequency : 433.92 or 868.35 MHz
Number of buttons : 2
Coding : Rolling code
Attention : Check the frequency of the transmitter to ensure compatibility with the receiver.
In stock !
Warning: Last items in stock!
Availability date:
Take advantage of discounts on this product:
- 6% discount for 2 or more remotes
- 10% discount for 5 or more remotes
Rolling code gate/garage door remote control, 433 or 868 MHz, 2 channels.
This transmitter is not a universal remote control. It can only be programmed from an SLH beeper of the same frequency. To find out which frequency you need, please check the back of your original remote control to operate your swing gate / sliding gate / door automation before ordering.
The XT2 433 SLH and XT2 868 SLH remote controls are supplied with dedicated programming instructions. The battery is included.
Guide to programming your remote control from an already programmed remote control:
Step 1. Place your programmed beeper and your new beeper face to face. Press both buttons on your previously programmed remote. The LED on the remote will flash.
Step 2. Press and hold the button to be transmitted on your previously programmed remote control, then press the button you wish to program on your new remote control. The LED on your new remote will flash rapidly. Release both remotes.
Guide to programming your remote control from your receiver :
Step 1. Press and hold both buttons on your new remote until the LED on the remote flashes.
Step 2. Open the case of your receiver. On the receiver board, press and hold the programming button. The LED on the receiver will flash.
Step 3. While the LED on your remote control continues to flash, press and hold the button you wish to program on your new remote control. The LED on the receiver will light up steadily and then go out. Release the button. When using for the first time, press the newly programmed key twice (instead of once).
Any comments about the guide? Don't hesitate to contact us via the contact form!
Frequently asked questions :
I live in a condominium. Can I buy a FAAC XT2 433/868 SLH LR remote control and program it myself?
It is very likely that your property manager has blocked the condominium's receiver. Contact them before ordering.
Can I copy an XT2 433 SLH remote control from an 868 SLH remote control or vice versa?
No, these two models are not compatible with each other.
Can I copy an XT2 SLH remote from an SL or RC remote?
No, these two models are not compatible with each other.