FAAC XT4 433/868 SLH Remote control

New product

Brand : FAAC

Frequency : 433.92 or 868.35 MHz

Number of Buttons : 4

Battery : CR2032 x2

Coding : Rolling code

Attention : Check the frequency of the transmitter to ensure compatibility with the receiver.

More details

In stock !

18,50 € VAT incl.

  • 433 Mhz
  • 868 Mhz

More info

Take advantage of discounts on this product :

- 3% reduction with the purchase of 2 remote controls
- 5% discount with the purchase of 3 or more remote controls
- 7% discount with the purchase of 5 or more remote controls
- 10% discount with the purchase of 10 or more remote controls


Rolling code remote control, 433 or 868 MHz, 4 channels.
Warning : The remote control can be programmed without problem unless you are living in a condominium, in which case the receiver may be locked. Check before purchasing this remote.


Guide to programming your remote from an already programmed remote:

Step 1. While near your receiver, place your programmed remote control and your new remote control face to face. Press buttons 1 and 2 on your already programmed remote control. The LED on the remote control flashes.
Step 2. Press and hold the button to transmit on your already programmed remote control, then press the button you want to program on your new remote control. The LED on your new remote control flashes quickly. Release the pressure on both remote controls.
Step 3. Repeat the procedure for each button you want to program, then wait 10 seconds. Your new remote control is now programmed!


Guide to programming your remote from your receiver:

Step 1. Keep pressing buttons 1 and 2 on your new remote control until the LED on the remote control flashes.
Step 2. Open the case of your receiver. On the receiver board, keep the programming button pressed. The receiver LED flashes.
Step 3. While the LED on your remote continues to flash, press and hold the button you want to program on your new remote. The receiver LED lights up continuously, then goes out. Release the pressure.
Step 4. Double-press the button you just programmed on your new remote. Repeat the procedure for each button you want to program, then wait 10 seconds. Your new remote control is now programmed!

A note about the guide? Do not hesitate to contact us via the contact form!