FAAC XT2 433 SL Remote control

Take advantage of discounts on this product:

- 10% discount for 2 or more remotes
- 15% discount for 5 or more remotes

Rolling code gate/garage door remote control, 433.92 MHz, 2 channels.
Please note that this is not a universal remote control. The XT2 433 SL transmitter is only compatible with SL remote controls, which can be recognised by its navy blue colour. It is also not compatible with SLH and RC remotes which are black, white or grey.
So make sure it is compatible with your system to control your sliding gate/ swing gate/ door automation before ordering.
The FAAC XT2 433 SL remote control is supplied with instructions and the battery is included.

Guide to programming your remote control from an already programmed remote control:

Step 1. Place your programmed beep and your new beep face to face.
Step 2. Press and hold the button to be transmitted on your previously programmed remote, then press and hold the button on your new remote. The LED on your new remote control will flash and then stay on. Release both remotes.
Step 3. Repeat the procedure for each button you wish to program, then wait 10 seconds. Your new remote control is now programmed!

Guide to programming your remote control from your receiver :

Step 1. Open your receiver case and hold down the programming button.
Step 2. Press one of the buttons on your new remote control. Release all buttons and wait 10 seconds.
Step 3. Repeat the procedure for each button you wish to program, then wait 10 seconds. Your new transmitter is now programmed!

Any comments about the guide? Don't hesitate to contact us via the contact form!

Frequently asked questions :

I live in a condominium. Can I buy a FAAC XT2 433 SL remote control and program it myself?

It is very likely that your property manager has blocked the receiver for the condominium. Contact them before ordering.

Can I copy an XT2 433 SL remote control from an SLH or RC remote control?

No, these two models are not compatible with each other.