Hörmann HSE 4 BS remote control

4-button gate/garage door remote control with eyelet for attachment to key ring.
This transmitter is not a universal remote control. It is compatible with all Hörmann Bisecur remote controls. Please check the model of your functional remote control to operate your swing gate / sliding gate / door automation before ordering.
The remote control is supplied with full instructions for programming and the battery is included.

The manufacturer Hörmann stopped production of the HSE 2 BS model in November 2020 in favour of the HSE 4 BS, thus replacing the 2-button model.

The remote control holder can be attached to the sun visor of your car for quick and easy installation!
It is also possible to use the clip as a wall mount, however you will need fixing accessories which are not included.

Hormann hse4-868-ds remote control programming guide :

Step 1. Place your previously programmed transmitter and your new beeper side by side. Press and hold the button to be transmitted on your previously programmed remote control. The LED lights up blue for 2 seconds, then goes out. After 5 seconds, the LED flashes alternately in red and blue. Release the button.
Step 2. Press and hold the button you wish to program on your new remote control. The LED lights up blue for 2 seconds, goes out and then flashes slowly in blue. When the radio code is recognised, the LED flashes quickly in blue, then goes out after 2 seconds. Release the button.
Step 3. Repeat the procedure for each button you wish to program, then wait 10 seconds. Your new remote control is now programmed!

Any comments about the guide? Don't hesitate to contact us via the contact form!

Frequently asked questions :

I live in a condominium. Can I buy a Hörmann HSE 4 BS remote control and program it myself?

It is very likely that your building manager has blocked the condominium's receiver. Please contact them before ordering.