Nice FLO4R-S Remote control

Take advantage of discounts on this product:

- 8% discount for 2 or more remotes
- 10% discount for 3 or more remotes
- 12% discount for 5 or more remotes

433.92 MHz, 4-button rolling code gate/garage door remote control.
The FLO4R-S is not a universal remote control. It is only compatible with Nice FLOx2R, FLOXI2R, OXIBD and OX2 receivers.
The Nice FLOR-S remote control can be programmed from a Nice FLOR-S, ONE, FLORE, Nice Way and INTI remote control.
So make sure that your system is compatible with your swing gate / sliding gate / door automation before ordering.
The FLO4R-S transmitter is supplied with a dematerialised programming guide and the battery is included.

Guide to programming your remote control from an already programmed remote control :

Step 1. While in close proximity to your receiver, hold down the button on your new remote control for 5 seconds.
Step 2. Three times, at one second intervals, hold down the button on the previously programmed remote control for one second.
Step 3. Press and hold the button on your new remote control for 1 second, then wait 10 seconds. Your new remote control is now programmed!

Guide to programming your remote control from your receiver :

Step 1. Open your receiver case. On the receiver card, hold down the programming button until the LED on the card flashes.
Step 2. Press the button on your new remote control. The LED on your receiver will go out.
Step 3. After one second, press the button on the new remote control again. The LED on your receiver will flash three times. Your new remote control is now programmed!

Any comments about the guide? Don't hesitate to contact us via the contact form!

Frequently asked questions :

I live in a condominium. Can I buy a Nice FLO4R-S remote control and program it myself?

It is very likely that your property manager has blocked the condominium's receiver. Contact him before ordering.

Is this remote control compatible with the FLO remote controls?

No, these two beeps are not compatible.

Can the Nice FLO4R-S remote control be used with the Nice FLOx receiver?

No, the FLOR-S transmitters are compatible with the FLOxR receivers and are not compatible with the FLOx receivers.

How do I open the remote control box?

Simply press the eyelet at the bottom of the remote control with your thumb.