Nice ON4E Remote control

Take advantage of discounts on this product:

- 4% discount for 2 or more remotes
- 7% discount for 3 or more remotes
- 12% discount for 5 or more remotes

433.92 MHz rolling code gate/garage door remote control with 4 buttons.
The ON4E transmitter is not a universal remote control. It is only compatible with Nice FLOx2R, FLOXI2R, OXIBD, OX2 and OX4T receivers.
The Nice ONE remote control can be programmed from a Nice FLOR-S, ONE, FLORE, Nice Way and INTI remote control. It cannot be programmed from an ON4EFM transmitter, which looks identical but is blue in colour.
So check the compatibility of this transmitter with your system to control your swing gate / sliding gate / door automation before ordering.
The ON4E beeper is supplied with instructions and the battery is included.

Guide to programming your remote control from an already programmed remote control :

Step 1. While in close proximity to your receiver, hold down the button you wish to program on your new remote for 5 seconds.
Step 2. Three times, at one second intervals, hold down the button to be transmitted on the previously programmed remote control for one second.
Step 3. Press and hold the button on your new remote control for 1 second, then wait 10 seconds. Repeat the procedure for each button you wish to program. Your new remote control is now programmed!

Guide to programming your remote control from your receiver :

Step 1. Open your receiver case. On the receiver card, hold down the programming button until the LED on the card flashes.
Step 2. Press the button you wish to program on your new remote control. The LED on your receiver will go out.
Step 3. After one second, press the button on the new remote control again. The LED on your receiver will flash three times. Repeat the procedure for each button you want to program, then wait 10 seconds. Your new remote control is now programmed!

Any comments about the guide? Don't hesitate to contact us via the contact form!

Frequently asked questions :

I live in a condominium. Can I buy a Nice ON4E remote control and program it myself?

It is very likely that your building manager has blocked the condominium's receiver. Contact him before placing your order.

Is this remote control compatible with the ONEFM remote controls?

No, these two transmitters are not compatible.