Brand : V2
Frequency : 433.92 MHz
Number of Buttons : 4
Battery : CR2032
Coding : Rolling code
In stock !
Warning: Last items in stock!
Take advantage of discounts on this product :
- 3% reduction with the purchase of 2 remote controls
- 5% discount with the purchase of 3 or more remote controls
- 7% discount with the purchase of 5 or more remote controls
- 10% discount with the purchase of 10 or more remote controls
Rolling code remote control, 433.92 MHz, 4 channels.
Compatible only with V2 brand receivers with a frequency of 433.92 MHz.
Each button works independently and therefore, on a single MATCH transmitter it is possible to memorize the code of 4 different transmitters.
The remote control is supplied with complete instructions.
Warning: The remote control can be programmed without problem unless you are living in a condominium, in which case the receiver may be locked. Check before purchasing this remote.
Guide to programming your remote from an already programmed remote:
Step 1. Keep pressing two buttons on your MATCH remote control simultaneously for 3 seconds: A button (Ex. T1) which is the button you want to program and a button (Ex. T2) which corresponds to one of the three other keys (optional). The indicator light comes on steady.
Step 2. Release the T2 key, then one second after release the T1 key. Programming is then activated for 10 seconds during which you must bring your already programmed remote control under the MATCH remote control and hold down the button to be copied. The indicator light on your MATCH remote control flashes while it stores the code and then goes out. Wait 10 seconds. Your remote control is now programmed!
Note: The MATCH LED will make 5 double flashes if programming is unsuccessful.
A note about the guide? Do not hesitate to contact us via the contact form!