V2 PHOX4 contract 47 / 50 Remote control

Take advantage of discounts on this product:

- 7% discount for 2 or more remotes
- 10% discount for 3 or more remotes

433.92 MHz rolling code remote control with 4 buttons. It works with v2 Personal pass technology.
Attention: This transmitter is not a universal remote control. It is only compatible with V2 brand receivers and 433.92 MHz frequency to control your sliding gate / swing gate / door automation.
Variable code transmission / Available in contract 47 or contract 50. Attention: different contracts are not compatible. Therefore, check the contract indicated on the back of your functional remote control before ordering.
The PHOX beeper is supplied with instructions and the battery is included.

PHOX v2 remote controls do not have a copy function. Therefore, it is not possible to program it from another remote control. They are programmed directly from the v2 receiver of your motorization.

Guide for programming your remote control from your WALLY receiver:

Step 1. Open the housing of your receiver. Press and hold the programming button on the receiver board. The LED of your receiver lights up.
Step 2. Press the button you wish to program on your new remote control. The LED on your receiver will flash once and then stay on.
Step 3. Repeat the procedure for each button you wish to program, then wait 10 seconds. Your new remote control is now programmed!

Any comments about the guide? Don't hesitate to contact us via the contact form!

Frequently asked questions :

I live in a condominium. Can I buy a v2 PHOX remote control and program it myself?

It is very likely that your property manager has blocked the co-ownership's receiver. Contact them before placing an order.

Are two v2 PHOX remote controls with different contracts compatible?

No. Only two remote controls with the same contract are compatible with each other.
Make sure you look at the back of your original remote control before purchasing this remote control.