ERREKA remote control - IRIS 2 buttons

Take advantage of discounts on this product:

- 18% discount for 2 or more remotes
- 22% discount for 5 or more remotes

Remote control with rolling code, 433.92 or 868.35 MHz, 2 channels.
The colour of the remote control varies according to the frequency: grey for 433.92 Mhz and black for 868.35 Mhz. The IRIS transmitter is supplied with instructions and the battery is included.
Warning: This transmitter is not universal. It is only compatible with an original IRIS remote control with the same frequency (and therefore the same colour). Check the compatibility of this remote control before purchasing.

Guide to programming your remote control from an already programmed remote control :

Step 1. While in close proximity to your receiver, make an electrical bridge between pins 1 and 5 of the 5-way connector on the side of the already programmed beep. The receiver will hiss to indicate that it is ready to record codes.
Step 2. Press the button you wish to program on your new remote control. If the registration is successful, the receiver will make two whistling sounds.
Step 3. Repeat the procedure for each button you wish to program, then wait 10 seconds. Your new transmitter is now programmed!

Guide to programming your remote control from your receiver :

Step 1. Open your receiver case. On the receiver card, hold down the programming button.
Step 2. Press the button you wish to program on your new remote control. If the registration is correct, the receiver will make two whistling sounds.
Step 3. Repeat the procedure for each button you wish to program, then wait 10 seconds. Your new remote control is now programmed!

Any comments about the guide? Don't hesitate to contact us via the contact form!

Frequently asked questions :

Can I choose any frequency for my gate / garage door?

No. Only one of the two frequencies can work with your motorisation. Please check this before ordering. (The list of compatibilities is available above).

I live in a condominium. Can I buy an Erreka IRIS remote control and program it myself?

No. It is very likely that your property manager has blocked the receiver in the condominium. Please contact them before ordering.