King Gates STYLO 2K remote control

Take advantage of discounts on this product:

- 18% discount for 2 or more remotes
- 22% discount for 5 or more remotes

Rolling code gate/garage door remote control, 433.92 MHz, 2 channels.

The STYLO 2K transmitter is not a universal remote control. It is only compatible with Fred 3, Novo RX2, the old Fred Myo 2 and the new Freddy 2 receivers.
So make sure that this remote control is compatible with your system for controlling your sliding gate/ swing gate/ door automation before you buy.

Furthermore, STYLO transmitters are not able to copy other remote controls. It is necessary to register them directly on the receiver in order to make them functional.

This model is not supplied with a manual. However, we have provided a programming guide below. The battery is included.

Guide to programming your remote control from your receiver:

Step 1. Open your receiver case. On the receiver board, press and hold the programming button. The LED on your receiver will flash.
Step 2. Press and hold the button you want to program on your new remote control for one second. The LED on your receiver will go out within 10 seconds of releasing the button.
Step 3. Repeat the procedure for each button you wish to program, then wait 10 seconds. Your new beeper is now programmed!

Any comments about the guide? Don't hesitate to contact us via the contact form!

Frequently asked questions :

Are the STYLO 4 and STYLO 2K remote controls compatible?

No, because the STYLO 2K model is not compatible with older installations. However, it is compatible with the STYLO 4K model. However, make sure you only need two buttons and not four.

I live in a condominium. Can I buy a King Gates STYLO 2K remote control and program it myself?

It is likely that your building manager has blocked the condominium receiver. Contact them before ordering.