Brand : Nice
Frequency : 433,92 Mhz
Number of buttons : 9
Coding : Rolling Code
In stock !
Remote control with rolling code, 433.92 MHz, 9 buttons.
The WM009C remote control is compatible with Nice FLOx2R, FLOXI2R, OXIBD, OX2 and OX4T receivers.
The Nice Way remote control can be programmed from a Nice FLOR-S, ONE, FLORE, Nice Way and INTI remote control.
The battery is included.
It is a modular remote control: it is designed to be inserted in a support.
Domobip offers you the WSW white square wall bracket supplied with fixing screws.
The dimensions of the wall bracket are 80 x 80 x 10 mm.
Guide for programming your remote control from an already programmed remote control :
Step 1. While in close proximity to your receiver, hold down the button you wish to program on your new remote control for 5 seconds.
Step 2. Three times, at one second intervals, hold down the button to be transmitted on the previously programmed remote control for one second. Press and hold the button on your new remote control for 1 second.
Guide to programming your remote control from your receiver :
Step 1. Open your receiver case. On the receiver card, hold down the programming button until the LED on the card flashes.
Step 2. Press the button you wish to program on your new remote control. The LED on your receiver will go out.
Step 3. After one second, press the button on the new remote control again. The LED on your receiver will flash three times.
Any comments about the guide? Do not hesitate to contact us via the contact form!
Frequently asked questions :
I live in a condominium. Can I buy a Nice WM009C remote control and program it myself?
It is very likely that your property manager has blocked the co-ownership's receiver. Contact him before placing your order.