Français
English
Deutsch
Italiano
BFT Mitto B remote control - RCB02 becomes Mitto Cool C2
⭐⭐⭐⭐⭐ 4,9 / 5
Volume discounts
| Quantity | Unit discount | You Save |
|---|---|---|
| 2 | 9.2% | €2.98 |
| 3 | 15.2% | €7.39 |
| 5 | 19.6% | €15.88 |
Discover the BFT Mitto Cool C2 Remote Control
The BFT Mitto Cool C2 remote control is the essential tool for managing your gates and garage doors. Designed with advanced technology, it offers optimal security through its rolling code system, ensuring a unique transmission with each use.
This model replaces the BFT Mitto 2B. The Mitto Cool C2 is compatible and visually very similar to the Mitto 2B, while offering an improved design for better ergonomics.
Remote Control Registration Guide
Programming the BFT Mitto Cool C2 remote control is simple. Follow these steps to register it on your receiver:
- Open the receiver's casing: Locate your BFT receiver, usually near the automation system.
- Put the receiver in programming mode: Press the programming button (SW1) on the receiver until the LED starts flashing.
- Program the remote control: Press both buttons on the remote at the same time. Release them when the LED stays on, then press the left button to register.
- Test the remote control: Press the programmed button to check if the remote works correctly with your automation.
Technical Specifications
- Reference: Mitto Cool C2
- Frequency: 433.92 MHz
- Number of buttons: 2
- Power supply: 12V A23 battery (included)
- Operation: Rolling code
- Manual: Not included
- Dimensions: 63 x 40 x 10 mm
- Range: Up to 50 meters in open space
Attention: Warning for Tenants
Tenants cannot duplicate remote controls for security and property rights reasons. Only the property owner or installation administrator can authorize or configure new remote controls for access management.
Why Choose the BFT Mitto Cool C2?
- Maximum Security: The rolling code technology offers enhanced security for your automations.
- Ease of Use: Simple and quick programming on the receiver without special equipment.
- Wide Compatibility: Compatible with many BFT receivers and remote controls.
- Ergonomic Design: Lightweight and compact, it fits easily into a pocket or bag.
Order Now and Simplify Your Life
Enhance the management of your automations with the BFT Mitto Cool C2 remote control. Order now and benefit from fast delivery and quality customer service.
Add the BFT Mitto Cool C2 remote control to your cart for a more convenient and secure experience today!
Compliance elements
All the products offered comply with European requirements: they bear the CE marking and have been assessed or manufactured in accordance with the applicable safety, health, and environmental obligations. They are distributed either by the brand itself or by a partner supplier established in a country of the European Union. However: the CE marking does not mean that the product can automatically be made available to children for any use — each product must be used according to its intended purpose, instructions, and safety precautions. For any questions regarding the origin, compliance, or use of the product, you can contact us via our contact form.
Guarantees
In accordance with regulations applicable to electronic devices, this product comes with a 2-year manufacturer’s warranty from the date of purchase (proof of purchase required).
What is the manufacturer’s warranty?
The manufacturer’s warranty covers exclusively original manufacturing defects (materials, assembly, components). After inspection, the manufacturer undertakes to repair or replace the product if a factory defect is confirmed, in accordance with its own procedures.
Cases not covered by the warranty
The manufacturer’s warranty does not apply in the following situations:
- Poor maintenance, abnormal use, or failure to follow the instructions for use.
- Improper installation (incorrect wiring, incompatibility, lack of a professional when required).
- External damage: shocks, drops, breakage, oxidation, liquid, corrosion, infestation, fire, flooding, power surge/lightning, unsuitable environment.
- Normal wear and tear and consumables (batteries, wear parts, accessories).
- Unauthorized modifications or repairs, opening the product without approval, non-original parts.
- Altered, removed or unreadable serial number.
- Cosmetic defects that do not affect operation (scratches, scuffs, yellowing).
What is Domobip’s role?
Domobip acts solely as an intermediary between you and the manufacturer. Warranty claims are handled exclusively under the conditions set by the manufacturer and require a product inspection (testing, diagnostics, visual check, etc.). Domobip submits your case, monitors the process, and keeps you informed of the manufacturer’s decision.
If the manufacturer accepts the warranty claim, Domobip will reimburse you for the shipping costs of sending the defective product to the manufacturer (upon presentation of proof, according to current rates and conditions). In case of warranty refusal, transport, inspection, or return costs remain the customer’s responsibility.
The manufacturer’s warranty does not apply to spare parts or second-hand products.