Français
English
Deutsch
Italiano
Nice DOMI W1 wall-mounted remote control
⭐⭐⭐⭐⭐ 4,9 / 5
This reference replaces models W1 and PLANO1.
Discover the Nice DOMI W1 Remote Control
The Nice DOMI W1 remote control is perfect for easily operating your roller shutters and awnings. Modern and stylish, it blends seamlessly into interiors thanks to its square mounting plate. It allows smooth and secure management of your installations with its advanced dual bidirectional coding and Rolling Code O-Code technology.
Compatibility and Associated Receivers
The Nice DOMI W1 remote control is compatible with several motors and remote controls from the Nice brand:
- Motors: Era Mat (A and T), Era Fit, Era Plus, Era Inn, as well as other motors from the Nice Era range
- Remote Controls: Nice Era W1 / Era W6, Era P1 / Era P6, Era MW1, as well as older models ERGO 1 and PLANO 1
Remote Control Registration Guide
Programming the Nice DOMI W1 remote control with your receiver is simple. Follow these steps to configure your remote control with your Nice motors:
- Preparation (if necessary): If your system is not compatible with the bidirectional mode, press and hold the "PRG" and "ESC" buttons on the back simultaneously, and the "-" button on the front. The LED flashes green, then lights up red. The O-Code configuration is now activated.
- Locate the receiver: It is usually located in the motor of your roller shutter or awning.
- Activate programming mode: Hold the programming button on the receiver until the LED indicator lights up.
- Pair the remote control: Press the button on the remote control to register it. A quick flash confirms the successful pairing.
- Check operation: Press the button on the remote control to test if the motor responds correctly.
Technical Specifications
- Frequency: 433.92 MHz
- Number of channels: 1 channel
- Number of buttons: 4 (Up, Down, Stop, and Status Request)
- Power supply: AAA batteries (included)
- Coding system: Dual bidirectional coding (BD) and Rolling Code (O-Code)
- Dimensions: 50 x 50 x 13 mm
- Range: Up to 200 m outdoors and 35 m indoors
- Manual: Digital version provided (QR code on the packaging)
Benefits of the Nice DOMI W1
- Security: The dual Rolling Code and bidirectional coding prevent any signal duplication attempts.
- Convenience: Wall-mounted plate for an aesthetic and functional installation.
- Wide Compatibility: Works with major motors and roller shutter systems from the Nice brand.
- Modern Design: Compact and refined format, ideal for contemporary interiors.
- Interactivity: Bidirectional functionality with a "i" button to request the status of the shutters.
Order Your Nice DOMI W1 Remote Control
Simplify the management of your roller shutters and awnings with the Nice DOMI W1 remote control. Order now to enjoy fast delivery and quality customer support.
Add the Nice DOMI W1 to your cart and discover a solution that combines modernity, reliability, and exceptional performance for your home.
Compliance elements
All the products offered comply with European requirements: they bear the CE marking and have been assessed or manufactured in accordance with the applicable safety, health, and environmental obligations. They are distributed either by the brand itself or by a partner supplier established in a country of the European Union. However: the CE marking does not mean that the product can automatically be made available to children for any use — each product must be used according to its intended purpose, instructions, and safety precautions. For any questions regarding the origin, compliance, or use of the product, you can contact us via our contact form.
Guarantees
In accordance with regulations applicable to electronic devices, this product comes with a 2-year manufacturer’s warranty from the date of purchase (proof of purchase required).
What is the manufacturer’s warranty?
The manufacturer’s warranty covers exclusively original manufacturing defects (materials, assembly, components). After inspection, the manufacturer undertakes to repair or replace the product if a factory defect is confirmed, in accordance with its own procedures.
Cases not covered by the warranty
The manufacturer’s warranty does not apply in the following situations:
- Poor maintenance, abnormal use, or failure to follow the instructions for use.
- Improper installation (incorrect wiring, incompatibility, lack of a professional when required).
- External damage: shocks, drops, breakage, oxidation, liquid, corrosion, infestation, fire, flooding, power surge/lightning, unsuitable environment.
- Normal wear and tear and consumables (batteries, wear parts, accessories).
- Unauthorized modifications or repairs, opening the product without approval, non-original parts.
- Altered, removed or unreadable serial number.
- Cosmetic defects that do not affect operation (scratches, scuffs, yellowing).
What is Domobip’s role?
Domobip acts solely as an intermediary between you and the manufacturer. Warranty claims are handled exclusively under the conditions set by the manufacturer and require a product inspection (testing, diagnostics, visual check, etc.). Domobip submits your case, monitors the process, and keeps you informed of the manufacturer’s decision.
If the manufacturer accepts the warranty claim, Domobip will reimburse you for the shipping costs of sending the defective product to the manufacturer (upon presentation of proof, according to current rates and conditions). In case of warranty refusal, transport, inspection, or return costs remain the customer’s responsibility.
The manufacturer’s warranty does not apply to spare parts or second-hand products.