V2 PHOX2 contract 47 remote control View larger

V2 PHOX2 contract 47 remote control

PHOX2

New product

Brand : V2

Frequency : 433.92 MHz

Number of Buttons : 2

Battery : CR2032

Coding : Rolling code

Contract : 47

More details

In stock !

22,90 € VAT incl.

More info

Take advantage of discounts on this product :

- 3% reduction with the purchase of 2 remote controls
- 5% discount with the purchase of 3 or more remote controls
- 7% discount with the purchase of 5 or more remote controls
- 10% discount with the purchase of 10 or more remote controls


Rolling code remote control, 433.92 MHz, 2 channels.
Compatible only with V2 brand receivers with a frequency of 433.92 MHz.
Rolling code transmission / Available under contract 47.
Possibility of obtaining up to 14 channels by associating the pressure of several keys.
Programming by radio thanks to Flash-prog and Winppcl.
Warning: The remote control can be programmed without problem unless you are living in a condominium, in which case the receiver may be locked. Check before purchasing this remote.


Guide to programming your remote control from your WALLY receiver:

Step 1. Open the case of your receiver. On the receiver board, keep the programming button pressed. The LED on your receiver lights up.
Step 2. Press the button you want to program on your new remote. The LED on your receiver flashes once and then stays on steady.
Step 3. Repeat the procedure for each button you want to program, then wait 10 seconds. Your new remote control is now programmed!
A note about the guide? Do not hesitate to contact us via the contact form!