S 435 TX2
Brand : Cardin
Frequency : 433.92 MHz
Number of buttons : 2
Battery : 23A (12V)
Coding : Rolling code
In stock !
Warning: Last items in stock!
Take advantage of discounts on this product :
- 3% reduction with the purchase of 2 remote controls
- 5% discount with the purchase of 3 or more remote controls
- 7% discount with the purchase of 5 or more remote controls
- 10% discount with the purchase of 10 or more remote controls
Rolling code remote control, 433.92 MHz, 2 channels.
Compatible only with S435 receiver.
Warning: The remote control can be programmed without problem unless you are living in a condominium, in which case the receiver may be locked. Check before purchasing this remote.
Guide to programming your remote:
Step 1. Open the case of your receiver. On the receiver board, press the programming button. The LED of your receiver flashes (It can also stay on).
Step 2. Press and hold the button you want to program on your new remote for one second, then release the press. The LED on your receiver will go out within 10 seconds of releasing the button.
Step 3. Repeat the procedure for each button you want to program, then wait 10 seconds. Your new remote control is now programmed!
Warning: When using your remote control, do not keep the button pressed for too long, otherwise the memory will be erased. If you think you've cleared your remote's memory, try programming it again with the guide above.
A note about the guide? Do not hesitate to contact us via the contact form!