Hörmann HSE 1 BS remote control

4-button gate/garage door remote control with an eyelet for attachment to a key ring.
This transmitter is not a universal remote control. It is compatible with all Hörmann Bisecur remote controls. Please check the model of your functional remote control to operate your swing gate / sliding gate / door automation before ordering.
The remote control is supplied with full instructions for programming and the battery is included.

Choose a remote control holder, to be fixed on the sun visor of your car for a quick and easy installation!
It is also possible to use the clip as a wall mount, however you will need fixing accessories which are not included.

Guide to programming your remote control from the operator :

Step 1. On Hormann operators, hold down the programming button for 5 seconds. On some operators, such as the SupraMatic 4 series, it is then necessary to press the up arrow before pressing the programming button again (the number 11 should appear). On the ProMatic 4, this step is not necessary.
Step 2. Hold the remote control a few centimetres away from the motor, then press and hold the button to be programmed. The LED on the remote control will light up steady blue, then flash alternately red and blue after a few seconds. On the SupraMatic 4, the number "11" should flash rapidly. Your new remote control is now programmed!

Note: We strongly recommend that you pair your remote control from the motor. The copy learning procedure does not always work.

Do you have any comments about the guide? Do not hesitate to contact us via the contact form!

Frequently asked questions :

I live in a condominium. Can I buy a Hörmann HSE 1 BS remote control and program it myself?

It is very likely that your building manager has blocked the condominium's receiver. Please contact them before ordering.