Nice FLO2R-S Remote control

Nice FLO2R-S: 2-Button Remote Control for Gates and Garage Doors

The Nice FLO2R-S is a practical 2-button remote control operating at 433.92 MHz frequency with a rolling code system, ensuring a high level of security. Ideal for controlling gates and garage doors, it provides protection against signal duplication and is easy to program.

Compatibility and Associated Receivers

The Nice FLO2R-S remote control is compatible with a wide range of Nice remotes and receivers:

• Remotes : Nice FLOR-S (FLO1R-S, FLO2R-S, FLO4R-S), Era ONE (ON2E, ON4E, ON9E), Era FLOR (FLO2RE, FLO4RE), INTI (INTI1, INTI2), NiceWay
• Receivers : Nice FLOX2R, FLOXI2R, OX2, OX4T, and OXIBD

Differences Between Nice FLO2R-S and FLO2

Although the Nice FLO2 and FLO2R-S look similar, the FLO2 uses a fixed code with DIP switches inside, while the FLO2R-S uses a rolling code, offering greater security. To check your model, open the remote: if there are DIP switches, it's the FLO2, otherwise, it's the FLO2R-S.

How to Open the Remote Without Damaging It

To change the battery or access the inside of the Nice FLO2R-S remote, press firmly on the ring located at the bottom of the case. This will separate the two parts of the housing safely, without tools and without damaging the remote.

Attention: Restrictions for Tenants

Important: If you are a tenant, you may not be able to program a switch-based remote even by correctly aligning the DIP switches, without authorization. Some receivers may require intervention from the property owner or manager to add a new remote control to the motor system. Be sure to check this before purchasing.

Remote Control Programming Guide

The Nice FLO2R-S remote control is easy to program. Here are the steps to register it to your receiver:

1. Access the receiver : Open the housing of the receiver (such as FLOX2R, FLOXI2R, OXIBD, etc.) near your motor.
2. Put the receiver in programming mode : Press the programming button on the receiver, and the LED will start blinking.
3. Program the remote : Hold down one of the buttons on the FLO2R-S remote until the receiver LED blinks rapidly, confirming the registration.
4. Test the remote : Press a button on the remote to verify that it works correctly.

Technical Specifications

• Frequency : 433.92 MHz
• Number of buttons : 2
• Power supply : 12V 23A battery included
• Coding : Rolling code
• Dimensions : 72 x 40 x 15 mm
• Range : 150-200 meters in open field
• Manual : Dematerialised supplied with the product

Why Choose the Nice FLO2R-S Remote Control?

• Enhanced Protection : With its rolling code, it provides advanced protection against unauthorized duplication.
• Dual Control : Its two buttons allow you to control two different systems.
• Wide Compatibility : Works with a wide range of Nice receivers and systems.
• Convenient Design : Its compact format makes it easy to carry in your pocket or on a keychain.

Order the Nice FLO2R-S Remote Control Today!

Get the Nice FLO2R-S remote control for secure and easy management of your gates and garage doors. Order it today and enjoy the reliable quality of Nice products.