Nice FLO4RE remote control View larger

Nice FLO4RE Remote control


New product

Brand : Nice

Frequency : 433.92 MHz

Number of Buttons : 4

Coding : Rolling code

More details

In stock !

21,30 € VAT incl.

More info

Take advantage of discounts on this product:

- 8% discount for 2 or more remotes
- 10% discount for 3 or more remotes
14% discount for 5 or more remotes

433.92 MHz rolling code gate/garage door remote control with 4 buttons.
The FLO4RE transmitter is not a universal remote control. It is only compatible with Nice FLOx2R, FLOXI2R, OXIBD , OX2 and OX4T receivers.
The Nice FLORE remote control can be programmed from a Nice FLOR-S, ONE, FLORE, Nice Way and INTI remote control.
So make sure that your system is compatible with your swing gate / sliding gate / door automation system before ordering.
The FLO4 RE beeper is supplied with a programming guide and the battery is included.

Guide to programming your remote control from an already programmed remote control:

Step 1. While in close proximity to your receiver, hold down the button you wish to program on your new remote for 5 seconds.
Step 2. Three times, at one second intervals, hold down the button to be transmitted on the previously programmed remote control for one second. Press and hold the button on your new remote control for 1 second.

Guide to programming your remote control from your receiver :

Step 1. Open your receiver case. On the receiver card, hold down the programming button until the LED on the card flashes.
Step 2. Press the button you wish to program on your new remote control. The LED on your receiver will go out.
Step 3. After one second, press the button on the new remote control again. The LED on your receiver will flash three times.

Any comments about the guide? Do not hesitate to contact us via the contact form!

Frequently asked questions :

I live in a condominium. Can I buy a Nice FLO4RE remote control and program it myself?

It is very likely that your property manager has blocked the condominium's receiver. Contact him before placing your order.

Is this remote control compatible with the FLO remote controls?

No, these two transmitters are not compatible.