Brand : Nice
Frequency : 433.92 MHz
Number of buttons : 2
Coding : Rolling code
In stock !
Warning: Last items in stock!
Take advantage of discounts on this product:
- 10% discount for 2 or more remotes of the same colour
- 12% discount for 5 or more remotes of the same colour
If you wish to use a mix of colours and benefit from the discounts, add a single colour to the basket and specify the desired colours when placing your order.
Miniature rolling code remote control, 433.92 MHz, 2 buttons.
The INTI beeper is not a universal remote control. It is only compatible with Nice FLOx2R, FLOXI2R, OXIBD, OX2 and OX4T receivers.
The Nice INTI remote control can be programmed from a Nice FLOR-S, ONE, FLORE and INTI remote control.
So check the compatibility with your system to control your sliding gate / swing gate / door automation before ordering.
The Nice INTI2 transmitter is supplied with dematerialised instructions and the battery is included.
Guide to programming your remote control from an already programmed remote control :
Step 1. While being close to your receiver, hold down the button on your new remote control for 5 seconds.
Step 2. Three times, at one second intervals, hold down the button to be transmitted on the previously programmed remote control for one second.
Step 3. Press and hold the button on your new remote control for 1 second, then wait 10 seconds. Your new remote control is now programmed!
Guide to programming your remote control from your receiver :
Step 1. Open your receiver case. On the receiver card, hold down the programming button until the LED on the card flashes.
Step 2. Press the button on your new remote control. The LED on your receiver will go out.
Step 3. After one second, press the button on the new remote control again. The LED on your receiver will flash three times. Wait 10 seconds. Your new remote control is now programmed!
Any comments about the guide? Don't hesitate to contact us via the contact form!
Frequently asked questions :
I live in a condominium. Can I buy a Nice INTI remote control and program it myself?
It is very likely that your property manager has blocked the condominium's receiver. Please contact him/her before placing your order.