Brand : Nice
Frequency : 433.92 MHz
Number of buttons : 2
Battery : CR2032
Coding : Rolling code
In stock !
Warning: Last items in stock!
Take advantage of discounts on this product:
- 6% discount when you buy 2 remotes
- 10% discount when you buy 5 or more remote controls
- Contact us to order sequentially coded transmitters for multiple insertion ON2CE
Remote control with rolling code, 433.92 MHz, 2 buttons.
The ONE remote controls are compatible with the Nice FLOx2R, FLOXI2R, OXIBD , OX2 and OX4T receivers.
The Nice ONE remote control can be programmed from a Nice FLOR-S, ONE, FLORE, Nice Way and INTI remote control.
Guide to programming your remote control from an already programmed remote control :
Step 1. While being close to your receiver, hold down the button you wish to program on your new remote control for 5 seconds.
Step 2. Three times, at one second intervals, hold down the button to be transmitted on the previously programmed remote control for one second.
Step 3. Press and hold the button on your new remote control for 1 second, then wait 10 seconds. Repeat the procedure for each button you wish to program. Your new remote control is now programmed!
Guide to programming your remote control from your receiver :
Step 1. Open your receiver case. On the receiver card, hold down the programming button until the LED on the card flashes.
Step 2. Press the button you wish to program on your new remote control. The LED on your receiver will go out.
Step 3. After one second, press the button on the new remote control again. The LED on your receiver will flash three times. Repeat the procedure for each button you want to program, then wait 10 seconds. Your new remote control is now programmed!
Any comments about the guide? Don't hesitate to contact us via the contact form!
Frequently asked questions :
I live in a condominium. Can I buy a Nice ON2E remote control and program it myself?
It is very likely that your property manager has blocked the condominium's receiver. Contact him before placing your order.
Is this remote control compatible with the ONEFM remote controls?
No, these two transmitters are not compatible.