Brand : Nice
Frequency : 433.92 MHz
Number of buttons : 3
Battery : AAA (x2)
Coding : Rolling code
Dimensions : 80 x 80 x 15 mm
In stock !
Warning: Last items in stock!
The Nice W1 wall remote control is a remote control that allows you to control your automation from a distance of up to 35 metres indoors and 200 metres outdoors. This remote control has three buttons to raise, lower or stop your door.
The W1 wall-mounted remote control is supplied with a manual dedicated to the installation and programming of the product.
Guide to programming your remote control from an already programmed remote control :
Step 1. While in close proximity to your receiver, press and hold a button on the new remote control for 5 seconds.
Step 2. Three times, press and hold a button on your previously programmed remote control for one second, then release the button for one second.
Step 3. Press the button on your new remote control, then wait 10 seconds. Your new remote control is now programmed!
Guide to programming your remote control from your receiver :
Step 1. Open your receiver case. On the receiver board, press and hold the programming button. The LED on your receiver will light up.
Step 2. Press the button you want to program on your new remote control. The LED on your receiver will go out.
Step 3. Wait one second, then press that button again. The LED on your receiver will flash 3 times. Wait 10 seconds. Your new remote control is now programmed!