Brand : Nice
Frequency : 433.92 MHz
Number of buttons : 1
Battery : CR2032
Coding : Rolling code
In stock !
Warning: Last items in stock!
Take advantage of discounts on this product :
- 3% discount on the purchase of 2 remote controls
- 5% discount when you buy 3 or more remotes
- 7% discount when you buy 5 or more remotes
- 10% discount when you buy 10 or more remotes
Miniature rolling code remote control, 433.92 MHz, 1 button. Several colours are available!
Compatible with FLOR series receivers as well as OXI, OXIT, OX2, OX2T and OX4T receivers.
Please note : The remote control can be programmed without any problems unless you live in a condominium, in which case the receiver may be locked. Check before you buy this remote control.
Guide to programming your remote control from an already programmed remote control :
Step 1. While in close proximity to your receiver, hold down the button on your new remote control for 5 seconds.
Step 2. Three times, at one second intervals, hold down the button to be transmitted on the previously programmed remote control for one second.
Step 3. Press and hold the button on your new remote control for 1 second, then wait 10 seconds. Your new remote control is now programmed!
Guide to programming your remote control from your receiver :
Step 1. Open your receiver case. On the receiver card, hold down the programming button until the LED on the card flashes.
Step 2. Press the button on your new remote control. The LED on your receiver will go out.
Step 3. After one second, press the button on the new remote control again. The LED on your receiver will flash three times. Wait 10 seconds. Your new remote control is now programmed!
Any comments about the guide? Don't hesitate to contact us via the contact form!