IRIS remote control 4 buttons ERREKA

New product

Brand : Erreka

Frequency : 433.92 or 868.35 MHz

Number of Buttons : 4

Battery : CR2025

Coding : Rolling code

More details

In stock !

20,80 € VAT incl.

  • 433 Mhz
  • 868 Mhz

More info

Take advantage of discounts on this product :

- 3% reduction with the purchase of 2 remote controls
- 5% discount with the purchase of 3 or more remote controls
- 7% discount with the purchase of 5 or more remote controls
- 10% discount with the purchase of 10 or more remote controls

Rolling code remote control, 433.92 or 868.35 MHz, 4 channels.
The color of the remote control varies according to the frequency: gray for 433.92 Mhz and black for 868.35 Mhz.
Warning: The remote control can be programmed without problem unless you are living in a condominium, in which case the receiver may be locked. Check before purchasing this remote.


Guide to programming your remote from an already programmed remote:

Step 1. Being near your receiver, make an electrical bridge between pins 1 and 5 of the 5-way connector located on the side of the already programmed remote control. The receiver will chirp to indicate that it is ready to register the codes.
Step 2. Press the button you want to program on your new remote. If the registration is correct, the receiver will emit two whistles.
Step 3. Repeat the procedure for each button you want to program, then wait 10 seconds. Your new remote control is now programmed!


Guide to programming your remote from your receiver:

Step 1. Open the case of your receiver. On the receiver board, keep the programming button pressed.
Step 2. Press the button you want to program on your new remote. If the registration is correct, the receiver will emit two whistles.
Step 3. Repeat the procedure for each button you want to program, then wait 10 seconds. Your new remote control is now programmed!

A note about the guide? Do not hesitate to contact us via the contact form!