ERREKA remote control - LIRA

Take advantage of discounts on this product:

- 15% discount for 2 or more remotes
- 18% discount for 3 or more remotes
- 20% discount for 5 or more remotes

Remote control with rolling code, 433.92 MHz, 2 channels.
Attention: This transmitter is not universal. It is only compatible with an original LIRA remote control. Check the compatibility of this remote control before purchasing.
Supplied with full instructions and batteries are included.

Guide to programming your remote control from an already programmed remote control:

Step 1. While standing next to your receiver, push a small pointed object into the hole under the two buttons of the already programmed LIRA remote control. If you have a LRRE1 receiver, then press the button to be transmitted on the already programmed LIRA remote. The receiver will emit a whistle or a light signal.
Step 2. Press the button you wish to program on your new remote control. If the registration is correct, the receiver will emit a whistle or a light signal.
Step 3. Repeat the procedure for each button you wish to program, then wait 10 seconds. Your new transmitter is now programmed!

Guide to programming your remote control from your receiver :

Step 1. Open your receiver case. On the receiver card, hold down the programming button.
Step 2. Press the button you wish to program on your new remote control. If the registration is correct, the receiver will emit a whistle or a light signal.
Step 3. Repeat the procedure for each button you wish to program, then wait 10 seconds. Your new remote control is now programmed!

Any comments about the guide? Don't hesitate to contact us via the contact form!

Frequently asked questions :

I live in a condominium. Can I buy an Erreka LIRA remote control and program it myself?

It is very likely that your property manager has blocked the condominium's receiver. Contact him before placing your order.