HF ECO receiver - Intratone

The Intratone ECO HF receiver is the device for using the remote controls of the same brand (2 buttons and 4 buttons). After registering the receiver on your intratone.info residence, you can add the remote controls to be programmed. It is able to work with a rotating code (default) but also with integrated switch buttons (for the latter, the use of a Dip SWITCH programmer reference 12-0122 is necessary).

This receiver can be used in the following two cases:
- For real time vehicle access, in conjunction with the GPRS module available in the Data Mini HF. (Part number 06-0129).
- For use in read/write mode for the management of a car park thanks to the RW wiring.

The HF receiver has a built-in antenna. If required, a second antenna can also be integrated (order no. 12-0113). For an optimal reception range, it is strongly recommended to install the HF receiver high up.

Not visible in the picture, the receiver does have a housing to close it, allowing maximum water and dust resistance (IP67). It is also resistant to high temperatures (-20°C to +60°C). It is powered by 12-24 V only.
The receiver is therefore designed for outdoor installation on a wall surface.

Up to 250 remote controls can be stored on this receiver. It is also possible to manage up to two accesses thanks to its two relays.

The Intratone HF ECO receiver is supplied with mounting accessories and full installation and operating instructions.