Nice ON3EBD Remote control

Take advantage of discounts on this product:

- 7% discount on orders of 2 or more remote controls

433.92 MHz rolling code gate/garage door remote control with 4 buttons.
The ON3EBD model is compatible with both unidirectional (O-Code) Nice 433 MHz receivers and bidirectional receivers with the OXIBD model.
The ONE3 BD beeper is supplied with instructions and the battery is included.

On this remote control, 3 buttons are dedicated to learning a code and the fourth to programming a code.

Guide to programming your remote control from a previously programmed remote control :

Step 1. Standing close to your receiver, place the transmitters facing each other and press the button you wish to program on your new remote control.
Step 2. Press the button to be transmitted on the remote control already programmed. Both remotes will vibrate and the LED should light up green to indicate that the code has been transmitted.
Step 3. Repeat the procedure for each button you wish to program. Your new remote control is now programmed!

Guide to programming your remote control from the OXIBD receiver :

Step 1. Open the housing of the motorization where the receiver is connected, and hold down the programming button until its LED lights up solid green.
Step 2. Press and hold the button you wish to program on your new remote control until the LED on the OXI BD receiver flashes for several seconds, then lights up steady.
Step 3. Repeat the procedure for each button you wish to program, then wait 10 seconds. Your new remote control is now programmed!

Any comments on this guide? Don't hesitate to contact us via the contact form!

Frequently asked questions :

I live in a condominium. Can I buy a Nice ON3EBD remote control and program it myself?

It's very likely that your building manager has blocked the condominium's receiver. Please contact them before ordering.

Is this remote control compatible with the ON2E / ON4E remote controls?

Yes, the ON3EBD transmitter can retrieve the code from a ONE remote control.

Is this remote control compatible with ONEFM remote controls?

No, these two transmitters are not compatible.