Nice FLO1R-S remote control View larger

Nice FLO1R-S remote control

FLO1R-S

New product

Brand : Nice

Frequency : 433.92 MHz

Number of Buttons : 1

Battery : 12V (23A)

Coding : Rolling code

More details

In stock !

16,10 € VAT incl.

More info

Take advantage of discounts on this product :

- 3% reduction with the purchase of 2 remote controls
- 5% discount with the purchase of 3 or more remote controls
- 7% discount with the purchase of 5 or more remote controls
- 10% discount with the purchase of 10 or more remote controls

Rolling code remote control, 433.92 MHz, 1 button.
Compatible with the Nice FLOx2R receiver.
Warning: The remote control can be programmed without problem unless you are living in a condominium, in which case the receiver may be locked. Check before purchasing this remote.


Guide to programming your remote from an already programmed remote:

Step 1. While near your receiver, press and hold the button on your new remote control for 5 seconds.
Step 2. Three times, at one second intervals, press and hold the already programmed remote control button for one second.
Step 3. Press and hold on your new remote control for 1 second, then wait 10 seconds. Your new remote control is now programmed!


Guide to programming your remote from your receiver:

Step 1. Open the case of your receiver. On the receiver board, press and hold the programming button until its LED flashes.
Step 2. Press the button on your new remote. The diode of your receiver goes out.
Step 3. One second later, press the button on the new remote control again. The diode of your receiver flashes three times. Your new remote control is now programmed!

A note about the guide? Do not hesitate to contact us via the contact form!